H3C WA2612-AGN Скачать руководство пользователя страница 247

Страница: 247 / 447

234

Item Description

ACL

Specify the ACL to be used by the access device to restrict the access of the local user
after the user passes authentication.

IMPORTANT:

This option is only effective for common PPP and LAN users.

User-profile

Specify the user profile for the local user.

IMPORTANT:

•

This option is only effective for common PPP and LAN users.

•

The AP does not support configuring user profiles.

Configuring a user group

Select

Authentication

Users

from the navigation tree.

Click the

User Group

tab.

Figure 228

User group list

Click

Add

to enter the user group configuration page.

Figure 229

User group configuration page

Configure the user group as described in

Table 89

Click

Apply

Содержание WA2612-AGN
































































































































































































































































































































































































































































Результаты поиска

Содержание WA2612-AGN

Отзывы:

H3C WA2612-AGN, Инструкция по настройке через веб-интерфейс, Страница: 247 / 447

Результаты поиска

Содержание WA2612-AGN

Отзывы: