H3C WA Series, Руководство по базовой конфигурации

Страница: 84 / 137

11-9
Hotkey Function
Esc+> Specifies the cursor as the ending of the clipboard.
These hotkeys are defined by the AP. When you interact with the AP from terminal software, these keys
may be defined to perform other operations. If so, the definition of the terminal software will dominate.
Configuring Command Aliases
You can replace the first keyword of a command supported by the AP with your preferred keyword by
configuring the command alias function. For example, if you configure show as the replacement of the
display keyword for each display command, you can input the command alias show xx to execute the
display xx command.
Note the following when you configure command aliases:
z
When you input a command alias, the system displays and saves the command in its original
format instead of its alias. That is, you can define and use a command alias but the command is not
saved and restored in its alias.
z
When you define a command alias, the cmdkey and alias arguments must be in complete form.
z
With the command alias function enabled, when you input an incomplete keyword, which partially
matches both a defined alias and the keyword of a command, the alias wins; to execute the
command whose keyword partially matches your input, you need to input the complete keyword.
When you input a character string that matches multiple aliases partially, the system prompts you
for various matched information.
z
If you press Tab after you input the keyword of an alias, the original format of the keyword will be
displayed.
z
You can replace only the first keyword of a non-undo command instead of the complete command;
and you can replace only the second keyword of undo commands.
Follow these steps to configure command aliases:
To do… Use the command… Remarks
Enter system view system-view —
Enable the command
alias function
command-alias enable
Required
Disabled by default, that is, you cannot
configure command aliases.
Configure command
aliases
command-alias mapping cmdkey alias
Required
Not configured by default.