User Manual
H3C VG 10-10/10-11 Voice Gateway
Chapter 3 Web Configuration Guide
3-2
3.2 Login
Run the Internet Explorer. Type the IP address of the device “http:// xxx. xxx. xxx. xxx"
in the address bar and press <Enter>, then the Web login page will appear. VG
10-10/10-11 provides Chinese and English Web pages; you can select a language in
the login page, as shown in the following figure.
Figure 3-1
Login page
Select a user name and enter the password, and then click <Login> to enter the
configuration page.
For first login to the VG, you can type the factory set IP address “http:// 192.168.1.1” in
the address bar, or type the management IP address “http:// 192.168.192.1” via LAN
port. (Refer to 4.4.2 Configuring Management IP Address for details about
management IP address.)
The factory setting initial address information is listed in the following table.
Table 3-1
Initial address information
IP address
IP address mask
IP address type
192.168.1.1 255.255.255.0
Interface IP address
192.168.192.1
255.255.255.0
Management IP address
The factory setting user information is listed in the following table.
Table 3-2
User information
User name
Initial password
User type
admin -
Administrator
plain -
Common
user
