User Manual
H3C VG 10-10/10-11 Voice Gateway
Chapter 2 Device Installation
2-2
Power socket
PC
Analog phone set
VG 10-11
LAN
PHONE
WAN
LINE
IP
PSTN
Power socket
PC
Analog phone set
VG 10-11
LAN
PHONE
WAN
LINE
IP
PSTN
1
Figure 2-2
Cabling for VG 10-1
Take the following steps for connection.
2.2.1 Connecting to LAN or Internet
Connect a switch or other Ethernet access device to the WAN port on VG 10-10/10-11
using cables.
2.2.2 Connecting to PC
Connect the Ethernet port on PC to the LAN port on VG 10-10/10-11 using cables.
2.2.3 Connecting to the Phone Set
Connect the phone set to the PHONE port on VG 10-10/10-11 using phone cable.
Connect the PSTN trunk to the LINE port on VG 10-11.
2.3 Power on the device
Power on the device according to the following order after connection.
1)
Connect the VG 10-10/10-11 and the power socket via special power adapter.
2)
Power on the device.
After powering on the VG 10-10, the PWR LED keeps on steadily and the SYS LED
keeps blinking; after powering on the VG 10-11, the PWR LED keeps on steadily.
