Command Manual – Getting Started
H3C VG Series Voice Gateways
Chapter 1 Fundamental Configuration Commands
1-15
Example
# Mark interface ethernet 0 as lan.
[VG-Ethernet0] description lan
1.3.5 display interfaces ethernet
Syntax
display interfaces ethernet
number
View
Any view
Parameter
number
: Interface number, which, combined with the parameter
type
, can define an
interface.
Description
Use the
display interfaces ethernet
command to view the status and other associated
information about the current Ethernet interface.
The following information is included:
z
The physical status and protocol status
z
The physical attributes (for example interface cable)
z
The IP address
z
The link-layer protocol, and its status and statistics.
z
Input/output message statistics
Example
# Display status and other associated information about the Ethernet 0.
[VG] display interfaces ethernet 0
Ethernet0 current state:down, line protocol current state:down
Description: Ethernet interface, Ethernet0 Interface
The Maximum Transmit Unit is 1500
Internet Address is 192.168.80.30(24)
IP Sending Frames' Format is Ethernet_II,Hardware address is
00-e0-fc-20-21-80
Media type is twisted pair, loopback is not set, promiscuous mode not set
Half-duplex mode, 10Mbps-speed mode, link type is autonegotiation
Input queue : (size/max/drops) 0/200/0
FIFO queueing: FIFO
(Outbound queue:Size/Length/Discards)
FIFO: 0/75/0
