H3C UniServer R4900 G3, Руководство пользователя

Страница: 130 / 299

121
Figure 152 Removing an mLOM Ethernet adapter
4.
Install a new mLOM Ethernet adapter. For more information, see " Installing an mLOM Ethernet
adapter ."
5.
Connect cables for the mLOM Ethernet adapter.
6.
Power on the server. For more information, see " Powering on the server ."
Verifying the replacement
Log in to HDM to verify that the mLOM Ethernet adapter is in a correct state. For more information,
see HDM online help.
Replacing a PCIe Ethernet adapter
WARNING!
To avoid bodily injury from hot surfaces, allow the server and its internal modules to cool before
touching them.
Procedure
1.
Power off the server. For more information, see " Powering off the server ."
2.
Remove the server from the rack. For more information, see " Removing the server from a rack ."
3.
Remove the access panel. For more information, see " Replacing the access panel ."
4.
Disconnect cables from the PCIe Ethernet adapter.
5.
Remove the PCIe Ethernet adapter. For more information, see " Replacing a riser card and a
PCIe module ."
6.
Install a new PCIe Ethernet adapter. For more information, see " Installing riser cards and PCIe
modules ."
7.
Connect cables for the PCIe Ethernet adapter.
8.
Install the access panel. For more information, see " Replacing the access panel ."
9.
Rack-mount the server. For more information, see " Rack-mounting the server ."
10.
Connect the power cord. For more information, see " Connecting the power cord ."
11.
Power on the server. For more information, see " Powering on the server ."