10
•
Verify that the state of the four LEDs on the front panel of the blade server are as expected. For
more information about the LEDs, see "Appendix A Sever specifications."
•
Log in to OM and verify that the firmware versions are as expected. If not, upgrade the firmware.
For more information, see the OM online help.
•
Log in to OM and verify that the server is operating correctly. If not, troubleshoot the server.
Modifying default parameters
Modifying the default user password of OM
1.
Log in to OM. For more information, see the OM user guide.
2.
Modify the OM default user password. For more information, see the OM online help.
Modifying the default user password of HDM
You cannot modify HDM password from OM.
To modify the default password of HDM:
1.
Log in to HDM. For more information, see "
Accessing the blade server HDM
2.
Modify the HDM default user password. For more information about the password requirements
and password setting method, see
H3C Servers HDM Online Help
.
Modifying the default IP address of HDM
Modifying IP through OM
1.
Log in to OM. For more information, see the OM user guide.
2.
Modify the HDM default IP address. For more information, see the OM online help.
Modifying IP through HDM
1.
Log in to HDM. For more information, see "
Accessing the blade server HDM
2.
Modify the HDM default IP address. For more information, see
H3C Servers HDM Online Help
.
Logging into the blade server operating system
For more information, see "
Logging in to the blade server operating system
Configuring basic BIOS settings
Setting the server boot order
The server has a default boot order. You can change the server boot order from the BIOS. For the
default boot order and the procedure of changing the server boot order, see the BIOS user guide for
the server.
Setting the BIOS passwords
BIOS passwords include a boot password as well as an administrator password and a user
password for the BIOS setup utility. By default, no passwords are set.
