113
Figure 78
Affixing a generic label
Affixing a label to a device
Remove the device label and stick it to the device. You can stick a device label to any desired position on
the device.
Guidelines
•
When you print, write, or affix labels, keep the labels clean.
•
Do not use ink-jet printers and ink pens.
•
Affix labels with good order in alignment.
•
Avoid cable bents or other positions that might affect cable installation when you stick a label or
bundle a cable tie with a power cord identification plate.
•
Bundle cable ties at the same positions of power cords, with identification plates on the same side.
•
The positions of "up", "down", "right" or "left" are all based on the viewpoint of the engineering
person who is working on the label.
Examples
The label examples in this document are for reference only.
Engineering labels for network cables
These labels are affixed to Ethernet cables that connect cards in a chassis.
Содержание SR8800 Series
Страница 12: ...3 Figure 2 SR8802 rear view 1 Rear cover handle 2 Grounding screw 3 Fan tray 3 2...
Страница 14: ...5 Figure 4 SR8805 rear view 1 Rear cover handle 2 Grounding screw 3 Fan tray 1 2 3...
Страница 16: ...7 Figure 6 SR8808 rear view 1 Air filter 2 Grounding screw 3 Rear cover handles...
