H3C SR8800-F, Руководство по установке

Страница: 45 / 148

2
Figure 1 Connecting a console port to a terminal
Setting terminal parameters
To access the device through the console port, you must run a terminal emulator program
(TeraTermPro, PuTTY, or Tera Term) on the configuration terminal. For information about how to use
a terminal emulator program, see the program's user guide.
The following are the required terminal settings:
•
Baud rate —9600.
•
Data bits —8.
•
Stop bits —1.
•
Parity —none.
•
Flow control —none.
Powering on the router
Before powering on the router, verify the following items:
•
The router has been steadily mounted.
•
All the cards have been correctly installed.
•
All the communication cables, fibers, power cords, and grounding cables have been correctly
connected.
•
The input power voltage meets the requirement of the router.
•
The console cable has been correctly connected.
•
The configuration terminal has been started, and the terminal parameters have been
configured.