104
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter DHCP address pool
view.
dhcp server ip-pool
pool-name
By default, no DHCP
address pool exists.
3.
Specify the BIMS server IP
address, port number, and
shared key.
bims-server ip ip-address
[
port
port-number
]
sharekey
{
cipher
|
simple
}
string
By default, no BIMS server
information is specified.
Specifying the configuration file for DHCP client
auto-configuration
Auto-configuration enables a device to obtain a set of configuration settings automatically from
servers when the device starts up without a next-startup configuration file. It requires the cooperation
of the DHCP server, HTTP server, DNS server, and TFTP server. For more information about
auto-configuration, see
Fundamentals Configuration Guide
.
Follow these guidelines to specify the parameters on the DHCP server for configuration file
acquisition:
•
If the configuration file is on a TFTP server, specify the IP address or name of the TFTP server,
and the configuration file name.
•
If the configuration file is on an HTTP server, specify the configuration file URL.
The DHCP client uses the obtained parameters to contact the TFTP server or the HTTP server to get
the configuration file.
Specifying the configuration file name in a DHCP address pool
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter DHCP address pool view.
dhcp server ip-pool pool-name
By default, no DHCP
address pool exists.
3.
Specify the IP address or the
name of a TFTP server.
•
Specify the IP address of the
TFTP server:
tftp-server ip-address
ip-address
•
Specify the name of the TFTP
server:
tftp-server domain-name
domain-name
You can specify both the IP
address and name of the
TFTP server.
By default, no TFTP server
is specified.
4.
Specify the configuration file
name.
bootfile-name
bootfile-name
By default, no configuration
file name is specified.
Specifying the configuration file URL in a DHCP address pool
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter DHCP address pool
view.
dhcp server ip-pool pool-name
By default, no DHCP address pool
exists.
3.
Specify the URL of the
configuration file.
bootfile-name
url
By default, no configuration file
URL is specified.
