77
Figure 78 Pressing the eject button
3.
Press the eject button again to eject the CF card part-way out of the CF card reader, and then
pull the CF card out of the CF card reader.
Figure 79 Pressing the eject button to eject the CF card
4.
Install a new CF card. For more information, see "
."
NOTE:
To protect the CF card, place it into an antistatic bag.
Replacing a transceiver module
WARNING!
•
Do not stare into the optical fibers.
•
When removing a transceiver module, do not touch the golden finger of the transceiver module.
When replacing a transceiver module, make sure the two transceiver modules connected by the
same optical fiber have the same wavelength.
To replace a transceiver module:
1.
Remove the optical fibers from the transceiver module.
2.
Pivot the clasp down to the horizontal position.
3.
As shown in
, holding the handle of the transceiver module, gently pull the transceiver
module out.
4.
Insert the plastic plug to the removed transceiver module, and put the transceiver module into
its original shipping materials.
