9
Figure6-2 Grounding the device mounted in a rack
7
Installing internal removable
components
WARNING!
To avoid injury, remove the access panel only when the fans stop rotating.
CAUTION:
The internal removable components and cables in the chassis are not hot swappable. To install or
maintain them, first power off the device.
The internal removable components supported by the device include riser modules, GPUs, storage
controllers, DIMMs, and M.2 SSD drives. These internal removable components are not provided
with the device. Purchase them yourself as required.
One GPU support bracket and four screws are shipped with a riser module. Three screws are used
to attach the GPU support bracket to the GPU. One screw is used to secure the storage controller
or GPU to the riser module.
