27
Step Command
Remarks
2.
Create an NQA operation
and enter NQA operation
view.
nqa
entry
admin-name
operation-tag
By default, no NQA operation is
created.
3.
Specify an NQA operation
type and enter its view.
type
{
dhcp
|
dlsw
|
dns
|
ftp
|
http
|
icmp-echo
|
snmp
|
tcp
|
udp-echo
}
The collaboration function is not
available for the path jitter, UDP
tracert, UDP jitter, and voice
operations.
4.
Configure a reaction entry.
reaction
item-number
checked-element
probe-fail
threshold-type consecutive
consecutive-occurrences
action-type
trigger-only
By default, no reaction entry is
configured.
You cannot modify the content of
an existing reaction entry.
5.
Exit to system view.
quit
N/A
6.
Associate Track with NQA.
See
High Availability
Configuration Guide
.
N/A
7.
Associate Track with an
application module.
See
High Availability
Configuration Guide
.
N/A
Configuring threshold monitoring
This function allows you to monitor the NQA operation running status.
Threshold types
An NQA operation supports the following threshold types:
•
average
—If the average value for the monitored performance metric either exceeds the upper
threshold or goes below the lower threshold, a threshold violation occurs.
•
accumulate
—If the total number of times that the monitored performance metric is out of the
specified value range reaches or exceeds the specified threshold, a threshold violation occurs.
•
consecutive
—If the number of consecutive times that the monitored performance metric is out of the
specified value range reaches or exceeds the specified threshold, a threshold violation occurs.
Threshold violations for the average or accumulate threshold type are determined on a per NQA
operation basis. The threshold violations for the consecutive type are determined from the time the NQA
operation starts.
Triggered actions
The following actions might be triggered:
•
none
—NQA displays results only on the terminal screen. It does not send traps to the NMS.
•
trap-only
—NQA displays results on the terminal screen, and meanwhile it sends traps to the NMS.
•
trigger-only
—NQA displays results on the terminal screen, and meanwhile triggers other modules
for collaboration.
The DNS operation does not support the action of sending trap messages.
Reaction entry
In a reaction entry, configure a monitored element, a threshold type, and an action to be triggered to
implement threshold monitoring.
