15
•
Use a small file for the FTP operation. A big file might result in transfer failure because of timeout,
or might affect other services for occupying much network bandwidth.
To configure the FTP operation:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Create an NQA operation
and enter NQA operation
view.
nqa
entry
admin-name
operation-tag
By default, no NQA operation is created.
3.
Specify the FTP type and
enter its view.
type ftp
N/A
4.
Specify the URL of the
destination FTP server.
url
url
By default, no URL is specified for the
destination FTP server.
Enter the URL in one of the following
formats:
•
ftp://
host
/
filename.
•
ftp://
host:port
/
filename.
When you perform the
get
operation, the
file name is required.
5.
(Optional.) Specify the
source IP address of FTP
request packets.
source ip
ip-address
By default, no source IP address is
specified.
The source IP address must be the IP
address of a local interface, and the
interface must be up. Otherwise, no FTP
requests can be sent out.
6.
Specify the FTP operation
type.
operation
{
get
|
put
}
By default, the FTP operation type is
get
,
which means obtaining files from the FTP
server.
7.
Specify an FTP login
username.
username
username
By default, no FTP login username is
configured.
8.
Specify an FTP login
password.
password
{
cipher
|
simple
}
password
By default, no FTP login password is
configured.
9.
(Optional.) Specify the
name of a file to be
transferred.
filename
file-name
By default, no file is specified.
This step is required if you perform the
put
operation.
10.
Set the data transmission
mode.
mode
{
active
|
passive
}
The default mode is
active
.
Configuring the HTTP operation
An HTTP operation measures the time for the NQA client to obtain data from an HTTP server.
To configure an HTTP operation:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
