H3C SR6600 SPE-FWM, Справочник по командам Vxlan

Страница: 38 / 45

32
Field Description
is an on-demand link or does not exist. The (s) attribute represents
the spoofing flag.
•
DOWN —The data link layer protocol of the interface is down.
Primary IP
Primary IP address of the interface. This field displays two hyphens ( -- ) if
the interface does not have an IP address.
Description Description of the interface.
Cause
Cause for the physical link state of an interface to be DOWN :
•
Administratively —The interface has been manually shut down by
using the shutdown command. To restore the physical state of the
interface, use the undo shutdown command.
•
Not connected —The interface is not mapped to any VSI, or the
mapped VSI does not have any AC or VXLAN tunnel.
Related commands
reset counters interface vsi-interface
distributed-gateway local
Use
distributed-gateway local
to specify a VSI interface as a distributed gateway to
provide services for the local site.
Use
undo distributed-gateway local
to restore the default.
Syntax
distributed-gateway local
undo distributed-gateway local
Default
A VSI interface is not a distributed gateway.
Views
VSI interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
If a VXLAN uses distributed gateway services, you must assign the same IP address to the VXLAN's
VSI interfaces on different VTEPs. To avoid IP address conflicts, you must specify the VSI interface
on each VTEP as a distributed gateway.
Examples
# Specify VSI-interface 100 as a distributed gateway.
<Sysname> system-view
[Sysname] interface vsi-interface 100
[Sysname-Vsi-interface100] distributed-gateway local
gateway subnet
Use
gateway subnet
to assign a subnet to a VSI.