11
undo flooding disable
Default
Flooding is enabled for a VSI.
Views
VSI view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
By default, the device floods unknown unicast frames received from the local site to the following
interfaces in the frame's VXLAN:
•
All site-facing interfaces except for the incoming interface.
•
All VXLAN tunnel interfaces.
To confine unknown unicast traffic to the site-facing interfaces, use this command to disable flooding
for the VSI bound to the VXLAN. The VSI will not flood unknown unicast frames to VXLAN tunnel
interfaces.
Examples
# Disable flooding for VSI
vsi1
.
<Sysname> system-view
[Sysname] vsi vsi1
[Sysname-vsi-vsi1] flooding disable
l2vpn enable
Use
l2vpn enable
to enable L2VPN.
Use
undo l2vpn enable
to disable L2VPN.
Syntax
l2vpn enable
undo l2vpn enable
Default
L2VPN is disabled.
Views
System view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
You must enable L2VPN before you can configure L2VPN settings.
Examples
# Enable L2VPN.
<Sysname> system-view
