221
Examples
# Output system information to the monitor through channel 0.
<Sysname> system-view
[Sysname] info-center monitor channel 0
info-center snmp channel
Use
info-center snmp channel
to configure the SNMP output channel. The system uses this channel to
output information to the SNMP module.
Use
undo info-center snmp channel
to restore the default SNMP output channel.
Syntax
info-center snmp channel
{
channel
-
number
|
channel
-
name
}
undo info-center snmp channel
Default
The system outputs information to the SNMP module through channel 5 (snmpagent).
Views
System view
Default command level
2: System level
Parameters
channel
-
number
: Specifies a channel by its number in the range of 0 to 9.
channel
-
name
: Specifies a channel by its name, a default name or a self-defined name. For information
about configuring a channel name, see the
info-center channel name
command.
Examples
# Output system information to the SNMP module through channel 6.
<Sysname> system-view
[Sysname] info-center snmp channel 6
Related commands
display snmp-agent
info-center source
Use
info-center source
to configure an information output rule for a module.
Use
undo info-center source
to remove the specified output rule.
Syntax
info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number
|
channel
-
name
} [
debug
{
level
severity
|
state
state
} * |
log
{
level
severity
|
state
state
} * |
trap
{
level
severity
|
state
state
} * ] *
undo info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number
|
channel
-
name
}
Default
The default output rules are listed in
.
Содержание SR6600 SPE-FWM
Страница 8: ...vi Index 254 ...
