212
Use
undo enable log updown
to disable a port from generating link up/down logs when the port state
changes.
Syntax
enable log updown
undo enable log updown
Default
All the ports are allowed to generate port link up/down logs when the port state changes.
Views
Interface view
Default command level
2: System level
Examples
# Disable port GigabitEthernet2/0/1 from generating link up/down logs.
<Sysname> system-view
[Sysname] interface gigabitethernet2/0/1
[Sysname-GigabitEthernet2/0/1] undo enable log updown
info-center channel name
Use
info-center channel
name
to name a channel.
Use
undo info-center channel to
command to restore the default name for a channel.
Syntax
info-center channel
channel-number
name
channel-name
undo info-center channel
channel-number
Default
See
for information about default channel names and channel numbers.
Views
System view
Default command level
2: System level
Parameters
channel
-
number
: Specifies a channel by its number in the range of 0 to 9.
channel-name
: Specifies a name for the channel, a case-insensitive string of 1 to 30 characters. It must
be a combination of letters and numbers and start with a letter.
Examples
# Name channel 0 as
abc
.
<Sysname> system-view
[Sysname] info-center channel 0 name abc
Содержание SR6600 SPE-FWM
Страница 8: ...vi Index 254 ...
