H3C SR6600 Series, Руководство по устранению неисправностей

Страница: 36 / 39

33
Command Description
display hardware internal dpaa slot slot-number
bman pool-info
Displays hardware buffer information for interfaces
on a FIP-240 or SAP-4EXP LPU.
display hardware internal himadp slot
slot-number
cnt
Displays statistics for interfaces on a HIM of a
FIP-240 LPU.
display hardware internal ibd pkt-info slot
slot-number slot-number
Displays packet statistics transmitted between
interface modules.
display hardware internal module interface-name
interface-number
statistics
Displays Ethernet interface statistics.
display hardware internal module interface-name
interface-number status
Displays status information for an Ethernet interface.
display hardware internal module interface-name
interface-number message
Displays configuration information for an Ethernet
interface.
display hardware internal module
interface-name
interface-number reg 1
Displays FPGA information for an Ethernet interface.
display hardware internal module interface-name
interface-number reg 2
Displays MAC information for an Ethernet interface.
display hardware internal module interface-name
interface-number
reg 3
Displays PHY information for an Ethernet interface.
display hardware internal nae slot slot-number
freein
Displays hardware buffer information for interfaces
on a FIP-300, FIP-310, or SAP-16EXP LPU.
display hardware internal poe slot slot-number
statistics
Displays statistics for interfaces on a FIP-300,
FIP-310, or SAP-16EXP LPU.
display interface Displays Ethernet interface information.
Troubleshooting active/standby MPU
switchover
This section provides troubleshooting information for common active/standby MPU switchover
problems.
Exceptional standby MPU reboot
Symptom
The standby MPU also reboots when the reboot command is used to reboot the active MPU.
Solution
To resolve the problem:
1. After the original active MPU starts up, use FTP or TFTP to transfer the up-to-date log files in
the
logfile directory on the MPU to the file server.
2. Search the log file for the reboot log message, for example, Command is reboot slot 0 .
3. Search the log file for the most recent system restart log message, for example,
SYSLOG_RESTART: System restarted .