H3C SOHO IE4300, Справочник по командам

Страница: 759 / 3296

34
Related commands
display dhcp server pool
expired
Use expired to set the lease duration in a DHCP address pool.
Use undo expired to restore the default lease duration for a DHCP address pool.
Syntax
expired { day day [ hour hour [ minute minute [ second second ] ] ] | unlimited }
undo expired
Default
The lease duration of a dynamic DHCP address pool is one day.
Views
DHCP address pool view
Predefined user roles
network-admin
Parameters
day day
: Specifies the number of days, in the range of 0 to 365.
hour hour : Specifies the number of hours, in the range of 0 to 23. The default is 0.
minute minute
: Specifies the number of minutes, in the range of 0 to 59. The default is 0.
second second
: Specifies the number of seconds, in the range of 0 to 59. The default is 0.
unlimited
: Specifies the unlimited lease duration, which is actually 136 years.
Usage guidelines
The DHCP server assigns an IP address together with the lease duration to the DHCP client. Before
the lease expires, the DHCP client must extend the lease duration.
•
If the lease extension operation succeeds, the DHCP client can continue to use the IP address.
•
If the lease extension operation does not succeed, both of the following events occur:

The DHCP client cannot use the IP address after the lease duration expires.

The DHCP server will label the IP address as an expired address.
Examples
# Set the lease duration to 1 day, 2 hours, 3 minutes, and 4 seconds in DHCP address pool 0.
<Sysname> system-view
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] expired day 1 hour 2 minute 3 second 4
Related commands
display dhcp server expired
display dhcp server pool
reset dhcp server expired