27
vlan-id2
must be equal to or greater than the value for
vlan-id1
. The value range for the
vlan-id
argument is 1 to 4094.
cost-value
: Specifies the path cost of the port, with an effective range that varies by path cost
calculation standard that is used.
•
When the IEEE 802.1d-1998 standard is selected for path cost calculation, the value range for
the
cost
argument is 1 to 65535.
•
When the IEEE 802.1t standard is selected for path cost calculation, the value range for the
cost
argument is 1 to 200000000.
•
When the private standard is selected for path cost calculation, the value range for the
cost
argument is 1 to 200000.
Usage guidelines
Path cost is an important factor in spanning tree calculation. Setting different path costs for a port in
MSTIs allows VLAN traffic flows to be forwarded along different physical links. This results in
VLAN-based load balancing.
The path cost setting of a port can affect the role selection of the port. When the path cost of a port is
changed, the system calculates the role of the port and initiates a state transition.
If this command is configured in Layer 2 Ethernet interface view, it takes effect only on that interface.
If this command is configured in Layer 2 aggregate interface view, it takes effect only on the
aggregate interface.
If this command is configured on a member port in an aggregation group, is takes effect only after the
port leaves the aggregation group.
If you do not specify an MSTI or VLAN, this command sets the path cost of a port in the MSTP CIST
or in the STP or RSTP spanning tree.
Examples
# In MSTP mode, set the path cost to 200 for GigabitEthernet 1/0/1 in MSTI 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] stp instance 2 cost 200
# In PVST mode, set the path cost to 200 for GigabitEthernet 1/0/1 in VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] stp vlan 2 cost 200
Related commands
display stp
stp pathcost-standard
stp dispute-protection
Use
stp dispute-protection
to enable dispute guard.
Use
undo stp dispute-protection
to disable dispute guard.
Syntax
stp dispute-protection
undo stp dispute-protection
Содержание SOHO IE4300
