H3C SOHO IE4300, Справочник по командам

Страница: 3114 / 3296

27
display process memory heap address
display process memory heap size
display process memory heap address
Use display process memory heap address to display heap memory content starting from
a specified memory block for a process.
Syntax
display process memory heap job job-id address starting-address length
memory-length [ slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
job job-id
: Specifies a user process by its job ID, in the range of 1 to 2147483647.
address starting-address
: Specifies the starting memory block by its address.
length memory-length : Specifies the memory block length in the range of 1 to 1024 bytes.
slot slot-number : Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays information for the master device.
cpu cpu-number : Specifies a CPU by its number.
Usage guidelines
When a user process runs abnormally, the command helps locate the problem.
Examples
# Display 128-byte memory block content starting from the memory block 0xb7e30580 for the
process
job 1 .
<Sysname> display process memory heap job 1 address b7e30580 length 128
B7E30580: 14 00 EF FF 00 00 00 00 E4 39 E2 B7 7C 05 E3 B7 .........9..|...
B7E30590: 14 00 EF FF 2F 73 62 69 6E 2F 73 6C 62 67 64 00 ..../sbin/slbgd.
B7E305A0: 14 00 EF FF 00 00 00 00 44 3B E2 B7 8C 05 E3 B7 ........D;......
B7E305B0: 14 00 EF FF 2F 73 62 69 6E 2F 6F 73 70 66 64 00 ..../sbin/ospfd.
B7E305C0: 14 00 EF FF 00 00 00 00 A4 3C E2 B7 AC 05 E3 B7 .........<......
B7E305D0: 14 00 EF FF 2F 73 62 69 6E 2F 6D 73 74 70 64 00 ..../sbin/mstpd.
B7E305E0: 14 00 EF FF 00 00 00 00 04 3E E2 B7 CC 05 E3 B7 .........>......
B7E305F0: 14 00 EF FF 2F 73 62 69 6E 2F 6E 74 70 64 00 00 ..../sbin/ntpd..
Related commands
display process memory heap
display process memory heap size