26
Usage guidelines
If PSE power usage crosses the threshold multiple times in succession, the system sends
notification messages only for the first crossing. For more information, see "Configuring SNMP."
Examples
# Set the power alarm threshold of PSE 4 to 90%.
<Sysname> system-view
[Sysname] poe utilization-threshold 90 pse 4
poe-profile
Use
poe-profile
to create a PoE profile and enter its view, or enter the view of an existing PoE
profile.
Use
undo poe-profile
to delete a PoE profile.
Syntax
poe-profile
profile-name
[
index
]
undo poe-profile
{
index index
|
name profile-name
}
Default
No PoE profiles exist.
Views
System view
Predefined user roles
network-admin
Parameters
profile-name
: Specifies a PoE profile name, a case-sensitive string of 1 to 15 characters. A PoE
configuration file name begins with a letter and must not contain reserved keywords including
undo
,
all
,
name
,
interface
,
user
,
poe
,
disable
,
max-power
,
mode
,
priority
, or
enable
.
index
: Specifies the index number of a PoE profile, in the range of 1 to 100.
Usage guidelines
To configure PIs in batches, use the PoE profile.
If you do not specify a profile index, the system automatically assigns an index (starting from 1) to
the PoE profile.
If a PoE profile is applied, use the
undo apply poe-profile
command to remove the
application before deleting the PoE profile.
Examples
# Create a PoE profile, name it
abc
, and specify the index number as
3
.
<Sysname> system-view
[Sysname] poe-profile abc 3
[Sysname-poe-profile-abc-3]
# Create a PoE profile and name it
def
. Do not specify the index number.
<Sysname> system-view
[Sysname] poe-profile def
[Sysname-poe-profile-def-1]
Содержание SOHO IE4300
