52
To configure settings for a single user line, use this command to enter the user line view.
To configure the same settings for multiple user lines, use this command to enter multiple user line
views.
Examples
# Enter the view of AUX line 0.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-line-aux0]
# Enter the views of VTY lines 0 to 4.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-line-vty0-4]
Related commands
user-interface class
user-interface class
Use
user-interface class
to enter user line class view.
Syntax
user-interface class
{
aux
|
usb
|
vty
}
Views
System view
Predefined user roles
network-admin
Parameters
aux
: Specifies the AUX line class view.
usb
: Specifies the USB line.
vty
: Specifies the VTY line class view.
Usage guidelines
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the
line class
command. As a best practice, use the
line class
command.
To configure the same settings for all user lines of a line class, you can use this command to enter
the user line class view.
The following commands are available in user line class view:
•
activation-key
•
auto-execute command
•
authentication-mode
•
command accounting
•
command authorization
•
escape-key
•
history-command max-size
Содержание SOHO IE4300
