67
Default
Stateless DHCPv6 is disabled.
Views
VLAN interface view
Predefined user roles
network-admin
Usage guidelines
Stateless DHCPv6 enables the interface to send an Information-request message to the multicast
address of all DHCPv6 servers and DHCPv6 relay agents for configuration parameters.
Examples
# Enable stateless DHCPv6 on VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 dhcp client stateless enable
reset ipv6 dhcp client statistics
Use
reset ipv6 dhcp client statistics
to clear DHCPv6 client statistics.
Syntax
reset
ipv6 dhcp client
statistics
[
interface
interface-type
interface-number
]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number
: Specifies an interface by its type and
number. If you do not specify an interface, this command clears all DHCPv6 client statistics.
Examples
# Clear all DHCPv6 client statistics.
<Sysname> reset ipv6 dhcp client statistics
Related commands
display ipv6 dhcp client statistics
DHCPv6 snooping commands
DHCPv6 snooping works between the DHCPv6 client and the DHCPv6 server or between the
DHCPv6 client and DHCPv6 the relay agent. DHCPv6 snooping does not work between the
DHCPv6 server and the DHCPv6 relay agent.
display ipv6 dhcp snooping binding
Use
display ipv6 dhcp snooping binding
to display DHCPv6 snooping address entries.
Содержание SOHO IE4300
