8
To connect an Ethernet cable:
1.
Disassemble the liquid-tight adapter and detach the rubber split sealing washer.
2.
Feed the Ethernet cable through the liquid-tight adapter and attach the split sealing washer.
3.
Connect the Ethernet cable to the target port on the AP.
4.
Fasten the liquid-tight adapter and sealing nut.
Figure 7 Connecting an Ethernet cable to the AP
Installing the AP
Attaching the AP bracket to the AP
CAUTION:
Keep the protective vent port closed on the AP. Do not open it.
Before mounting the AP on a wall or pole, attach the AP bracket to it.
To attach the AP bracket to the AP:
1.
Align the mounting holes in the AP bracket with the screw holes in the rear of the AP. Use M5
screws to attach the AP bracket to the AP.
Figure 8 Attaching the AP bracket to the AP
1
2
3
