H3C SFP-GE-SX-MM850-A, Руководство пользователя

Страница: 6 / 26

5
Installing the AP
IMPORTANT:
To ensure radio coverage, have the AP installed by technical personnel as a best practice.
When you install the AP, follow these restrictions and guidelines:
•
The AP is large and heavy. Avoid bodily injury and device damage during the installation.
•
If you install the AP on a pole, make sure the pole is vertical to the ground and iron components
have been treated with corrosion protection.
•
If you pole-mount the AP on the top of a building, make sure the AP does not project beyond the
sides of the building.
•
To avoid high temperature caused by exposure to the sun, install the AP in a place without or
with less direct sunlight and take protection measures if necessary.
Pre-installation tasks
Before installing an AP, perform the following tasks:
•
Connect the AP to the power source and the network. Examine the LED to verify that the AP
can operate correctly. For more information about the AP LED, see "
Appendix B LEDs and
ports ."
•
Verify that cabling at the installation site has been completed.
•
Record the AP MAC address and serial number marked on the rear of the AP for future use.