manualshive.com logo in svg

H3C SecPath V100-E, Руководство по установке

Поделиться
Скачать
H3C SecPath V100-E Скачать руководство пользователя страница 35

 

5-7

 

    TFTP download completed, Packet length 8790321 bytes.                

    System file length 7868992 bytes, http.zip file length 921329 bytes. 

                                                                         

    Writing file flash:/system to FLASH...                               

    Please wait, it may take a long time                                 

####################################################################     

Writing into Flash Succeeds.                                     

                                                      

    Writing file flash:/http.zip to FLASH...                   

    Please wait, it may take a long time                             

################################################################################ 

#########                                                   

    Writing into Flash Succeeds. 

Uploading/Downloading Applications/Files Using FTP 

The H3C SecPath series security gateway offers FTP server function, which provides you another way 
of updating configuration files, and upgrading application and Boot ROM program. You only need to 
connect a FTP client, local or remote, to the V100-E. When you pass the authentication, you can upload 
and download configuration files or applications.  

 

 

Upload: Transfer files from PCs running FTP client to the V100-E, namely the put operation. 
Download: Transfer files from the V100-E to PCs running FTP client, namely the get operation. 

 

Setting up upload/download environment 

z

 

Setting up the local upload/download environment 

Figure 5-3 

Set up the local upload/download environment 

 

 

Step1 

Connect the PC to the Ethernet port of the V100-E.  

Step2 

Configure the IP address of the Ethernet port of the V100-E. Here suppose it is 10.110.10.10.  

Step3 

Configure the IP address of the PC. Here suppose it is 10.110.10.13. 

Содержание SecPath V100-E








































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды