4
Figure 2
Installing cage nuts (T9006)
Attaching the cable management brackets to the IPS
The IPS uses signal cable management bracket and power cord management bracket to route the cables.
You need to install the signal cable management bracket separately for the T9010 IPS. All other T9000
IPSs come with the signal cable management brackets secured to the mounting brackets. You only need
to install the power cord management bracket for them.
•
For the T9010 IPS, the signal cable management bracket installation position is at the upper part of
the chassis. The power cord management bracket installation position is at the lower part of the
chassis. The installation procedure is the same for the two brackets. See
.
•
For the T9014 IPS, the power cord management bracket installation procedure is the same as the
T9010 IPS.
•
The power cord management bracket of the T9006 IPS has a slightly different structure. See
for its installation.
To install a cable management bracket:
1.
Unpack the cable management bracket.
