Manual version: 6PW102-20230321
BOM: 3123A1XP
iii
Table 4 SFP+ transceiver module specifications
Module
Central
wavelength
Connector
type
Cable
specifications
Maximum
transmission
distance
SFP-XG-SX-MM850-A
850 nm
LC
50/125 µm MMF
300 m (984.25 ft)
SFP-XG-LX-SM1310
1310 nm
LC
9/125 µm SMF
10 km (6.21 miles)
4 LEDs
The module provides LEDs to indicate the operating status of the module and ports.
Table 5 LED description
LED
Mark
Status
Description
System status LED
Steady green
The system is operating correctly or in
standby state.
Flashing green
HDM is initializing.
Flashing amber
An alarm has occurred.
Management
Ethernet copper port
LED/BMC network
port LED
LINK
ACT
ACT
On
Flashing
A link is present on the port and the port is
sending and receiving data.
On
Off
A link is present on the port.
Off
Off
No link is present on the port.
10GBASE-R-SFP+
fiber port LED
0/1
Flashing
The port is receiving or sending data.
On
A link is present on the port.
Off
No link is present on the port.
Power on/standby
button LED
Steady green
The system has started.
Flashing green
The system is starting.
Steady amber
The system is in standby state.
Flashing amber
A power anomaly has occurred.
Off
No power is present.
UID button LED
UID
On
The UID LED is activated.
Flashing (1 Hz)
The system is being managed from HDM
or the firmware is being upgraded.
Flashing (4 Hz)
HDM is restarting. To restart HDM, press
the UID button LED for a minimum of eight
seconds.
Off
The UID LED is not activated.
