57
|129 231817 Jan/31/2018 10:53:26 N/A cfa0:/dpi1.mdb |
|130 110592 Jan/31/2018 14:31:18 N/A cfa0:/core/node16_dpid_202565_11|
|_20180131-143118_1517409078.core |
|131 118784 Jul/24/2018 11:51:10 N/A cfa0:/core/node16_ntopd_820_11_2|
|0180724-115110_1532433070.core |
|132 118784 Dec/17/2018 08:32:20 N/A cfa0:/core/node16_ntopd_803_11_2|
|0181217-083220_1545035540.core |
|133 3249 Apr/16/2018 16:40:28 N/A cfa0:/ngips2018041616523608292.a|
|k |
|0 Exit |
============================================================================
Enter file No.:
2.
Enter the number of the file to delete. For example, enter
13
to delete the
sda0:/test.cfg
file.
3.
When the following message appears, enter
Y
.
The file you selected is sda0:/test.cfg,Delete it? [Y/N]
If the following message appears, the file is successfully deleted.
Deleting.....Done!
Restoring the factory-default configuration
CAUTION:
Restoring the factory-default configuration will permanently delete startup configuration files and
backup configuration files in the current storage medium.
To restore the factory-default configuration from the EXTENDED-BOOTWARE menu, make sure
password recovery capability is disabled. If the capability is enabled, you cannot perform the task.
After you perform this task, the device uses the factory-default configuration instead of the
configuration file for the next startup.
To enhance system security, disable password recovery capability.
To restore the factory-default configuration:
4.
Enter
5
in the EXTEND-BOOTWARE menu and then press
Enter
.
Enter your choice(0-9): 5
5.
Follow the system instruction to complete the task.
If password recovery capability is enabled, first disable the capability from the CLI, and then
reboot the device to access the EXTENDED-BOOTWARE menu.
Password recovery capability is enabled. To perform this operation, first disable
the password recovery capability using the undo password-recovery enable command
in CLI.
If password recovery capability is disabled, enter
Y
at the prompt to complete the task.
Because the password recovery capability is disabled, this operation can cause the
configuration files to be deleted, and the system will start up with factory
defaults. Are you sure to continue?[Y/N]Y
Setting...Done.
Skipping the configuration file
To perform this task, make sure password recovery capability is enabled. If the capability is disabled,
you cannot perform the task.