Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-37
1.1.15 display mpls ldp session
Syntax
display mpls ldp session
[
vpn-instance
vpn-instance-name
[
verbose
] ] [
peer-id
]
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
display mpls ldp session
[
all
] [
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays all information.
vpn-instance vpn-instance-name
: Specifies a VPN instance by its name. The
parameter is used to display the information about all peers of the specified VPN.
peer-id
: LSR ID of the peer.
verbose
: Displays detailed information.
|
: Filters the output information.
begin
: Begins with the specified string.
include
: Includes the specified string.
exclude
: Excludes the specified string.
regular-expression
: Regular expression. No blank space is acceptable.
Description
Use the
display mpls ldp session
command to display the information about the
sessions between peers.
Related commands:
mpls ldp
.
Examples
# Display the information about a session between peers.
<Sysname> display mpls ldp session
LDP Session(s) in Public Network
Total number of sessions: 1
--------------------------------------------------------------------------
Peer-ID Status LAM SsnRole FT MD5 KA-Sent/Rcv
--------------------------------------------------------------------------
