Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-34
2 172.17.0.0/16 3/NULL 172.17.1.1 Vlan16/Vlan14
*3 100.1.1.1/32 Liberal(1025)
-----------------------------------------------------------------
A '*' before an LSP means the LSP is not established
A '*' before a Label means the USCB or DSCB is stale
A '*' before a Label means the USCB or DSCB is stale
1.1.13 display mpls ldp peer
Syntax
display mpls ldp peer
[
peer-id
] [
vpn-instance
vpn-instance-name
[
verbose
]
[
peer-id
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
display mpls ldp peer
[
all
] [
verbose
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name
: Specifies a VPN instance by its name.
peer-id
: LSR ID of the peer.
verbose
: Displays detailed information.
|
: Filters the output information.
begin
: Begins with the specified string.
include
: Includes the specified string.
exclude
: Excludes the specified string.
regular-expression
: Regular expression. No blank space is acceptable.
all
: Display information about all peers.
Description
Use the
display mpls ldp peer
command to display information about specified or all
peers of the current LSR.
Related commands:
mpls ldp
.
Examples
# Display the peer information.
<Sysname> display mpls ldp peer
