Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-33
1.1.12 display mpls ldp Isp
Syntax
display mpls ldp lsp
[
vpn-instance
vpn-instance-name
[
dest-addr mask-length
] ] [ |
{
begin
|
exclude
|
include
}
regular-expression
]
display mpls ldp lsp
all
[ | {
begin
|
exclude
|
include
}
regular-expression
]
display mpls ldp lsp
[
dest-addr
mask-length
] [ | {
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
Default Level
1: Monitor level
Parameters
all
: Displays information about all LSPs established by LDP.
vpn-instance vpn-instance-name
: Specifies a VPN instance by its name.
dest-addr
: Destination address of the LSP.
mask-length
: Length of the mask for the destination address.
|
: Filters the output information.
begin
: Begins with the specified string.
include
: Includes the specified string.
exclude
: Excludes the specified string.
regular-expression
: Regular expression. No blank space is acceptable.
Description
Use the
display mpls ldp lsp
command to display information about LSPs established
by LDP.
Related commands:
display mpls ldp
.
Examples
# Display the information about the LSP created by LDP.
<Sysname> display mpls ldp lsp
LDP LSP Information
-----------------------------------------------------------------
SN DestAddress/Mask In/OutLabel Next-Hop In/Out-Interface
-----------------------------------------------------------------
1 100.10.1.0/24 3/NULL 100.10.1.2 Vlan12/Vlan16
