Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-26
PKTTYPE_IP :Sending to Slot 6, Dest=15.40.1.1, InnerLabel=1024, Vpn=1,
Token=9371650
// Send the packet (it is destined to 15.40.1.1 and has an inner label 1024) to the LPU.
*0.3824779 F-RT1 MFW/8/MPLSFW PACKET:
PUSH Label=1024, EXP=0, TTL=255
PUSH Label=1024, EXP=0, TTL=255
PKTTYPE_MPLS :Sending to Vlan3, PktLen=92, Label(s)=1024,1024, EXP=0, TTL=255
// Push inner incoming Label 1024 and outer incoming Label 1024, and send the packet
from VLAN- interface 3.
*0.3824779 F-RT1 MFW/8/MPLSFW PACKET:Slot=2;
MPLSFW_Input: Receiving from Vlan3, PktLen=88, Label(s)=1024, EXP=0, TTL=254
POP Label=1024, EXP=0, TTL=254
Delivering up to IP!
// Receive a packet (length: 88; label: 1024; POP label: 1024) from VLAN- interface 3,
and forward the packet like an IP packet.
*0.3824779 F-RT1 MFW/8/MPLSFW PACKET:Slot=2;
PKTTYPE_IP :Sending to Slot 6, Dest=15.40.1.1, InnerLabel=1024, Vpn=1,
Token=9371650
// Send the packet (it is destined to 15.40.1.1 and has an inner label 1024) to the LPU.
*0.3824851 F-RT1 MFW/8/MPLSFW PACKET:
PUSH Label=1024, EXP=0, TTL=255
PUSH Label=1024, EXP=0, TTL=255
PKTTYPE_MPLS :Sending to Vlan3, PktLen=92, Label(s)=1024,1024, EXP=0, TTL=255
// Push inner incoming Label 1024 and outer incoming Label 1024, and send the packet
from VLAN- interface 3.
*0.3824851 F-RT1 MFW/8/MPLSFW PACKET:Slot=2;
MPLSFW_Input: Receiving from Vlan3, PktLen=88, Label(s)=1024, EXP=0, TTL=254
POP Label=1024, EXP=0, TTL=254
Delivering up to IP!
// Receive a packet (length: 88; label: 1024; POP label: 1024) from VLAN- interface 3,
and forward the packet like an IP packet.
1.1.7 display mpls interface
Syntax
display mpls interface
[
interface-type
interface-number
] [
verbose
]
View
Any view
