26
openflow instance
Use
openflow instance
to create an OpenFlow instance and enter OpenFlow instance view.
Use
undo openflow instance
to remove an OpenFlow instance.
Syntax
openflow instance
instance-id
undo openflow instance
instance-id
Default
No OpenFlow instance exists.
Views
System view
Predefined user roles
network-admin
Parameters
instance-id
: Specifies an OpenFlow instance by its ID in the range of 1 to 4094.
Examples
# Create OpenFlow instance 1 and enter OpenFlow instance view.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1]
permit-port-type member-port
Use
permit-port-type member-port
to allow link aggregation member ports to be OpenFlow
instance ports.
Use
undo permit-port-type
to restore the default.
Syntax
permit-port-type member-port
undo permit-port-type
Default
Link aggregation member ports are not allowed to be OpenFlow instance ports.
Views
OpenFlow instance view
Predefined user roles
network-admin
Examples
# Configure OpenFlow instance 1 to allow link aggregation member ports to be OpenFlow instance
ports.
<Sysname> system-view
[Sysname] openflow instance 1
[Sysname-of-inst-1] permit-port-type member-port
