H3C S7500E-XS Series, Справочник по командам

Страница: 20 / 36

13
Field Mask field Description
ICMPv6 code N/A ICMPv6 code.
IPv6 ND target address N/A
Target IP address in an IPv6 Neighbor
Discovery message.
IPv6 ND source MAC
address
N/A
Source link-layer address in an IPv6 Neighbor
Discovery message.
IPv6 ND target MAC
address
N/A
Target link-layer address in an IPv6 Neighbor
Discovery message.
MPLS label N/A Label in the first MPLS header.
MPLS tc N/A Traffic Class (TC) in the first MPLS header.
Tunnel ID Mask
Metadata and mask that are associated with a
logical port.
IPv6 extension header Mask IPv6 extension header and mask.
Output interface N/A Output port.
VRF index N/A VPN index.
Fragment N/A Fragment.
Physical output interface N/A Output physical port.
CVLAN ID Mask CVLAN ID and mask.
Experiment N/A
Extension matching fields. Address ID
represents the unique identifier of an address.
Table 4 Actions
Field Description
Drop
Drops the matched packet. This action is not defined in the OpenFlow
specifications.
Output interface
Sends the packet through a specific port. For more information about ports,
see
Table 5 .
send length
Specifies the max length of bytes to be taken from the packet and sent to the
controller.
This field appears only when the reserved port of the controller type is specified
as the output port.
Group Specifies a group table to process the packet.
Set queue Maps the flow entry to a queue specified by its ID.
Set field Modifies a field of the packet.
Set MPLS TTL Sets the MPLS TTL.
Set IP TTL Sets the IP TTL.
Push VLAN tag Adds a VLAN tag to the packet.
Push MPLS tag Adds an MPLS tag to the packet.
Pop MPLS tag Removes the outermost MPLS tag from the packet.
Push PBB tag Adds a PBB service tag to the packet.
Pop VLAN tag Removes the outermost VLAN tag from the packet.
Pop PBB tag Removes the outermost PBB service tag from the packet.