4
By default, no MAC address entry is configured globally.
Make sure you have assigned the interface to the VLAN.
Adding or modifying a static or dynamic MAC address entry on an interface
1.
Enter system view.
system-view
2.
Enter interface view.
{
Enter Layer 2 Ethernet interface view.
interface interface-type interface-number
{
Enter Layer 2 aggregate interface view.
interface bridge-aggregation interface-number
3.
Add or modify a static or dynamic MAC address entry.
mac
-
address
{
dynamic
|
static
}
mac
-
address
vlan
vlan
-
id
By default, no MAC address entry is configured on an interface.
Make sure you have assigned the interface to the VLAN.
Adding or modifying a blackhole MAC address entry
1.
Enter system view.
system-view
2.
Add or modify a blackhole MAC address entry.
mac
-
address blackhole mac
-
address
vlan
vlan
-
id
By default, no blackhole MAC address entry is configured.
Adding or modifying a multiport unicast MAC address entry
About multiport unicast MAC address entry configuration
You can configure a multiport unicast MAC address entry to associate a unicast destination MAC
address with multiple ports. The frame with a destination MAC address matching the entry is sent out
of multiple ports.
For example, in NLB unicast mode (see
•
All servers within a cluster uses the cluster's MAC address as their own address.
•
Frames destined for the cluster are forwarded to every server in the group.
In this case, you can configure a multiport unicast MAC address entry on the device connected to the
server group. Then, the device forwards the frame destined for the server group to every server
through all ports connected to the servers within the cluster.
Содержание S6850 Series
Страница 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Страница 259: ...21 6 N A 200 6...
Страница 337: ...ii...