142
{
For a hybrid or trunk port, the PVID setting of the port does not change.
You can use a nonexistent VLAN as the PVID for a hybrid or trunk port, but not for an access port.
•
H3C recommends that you set the same PVID for local and remote ports.
•
Make sure a port is assigned to its PVID. Otherwise, when the port receives frames tagged with the
PVID or untagged frames, the port filters out these frames.
How ports of different link types handle frames
Actions Access
Trunk
Hybrid
In the
inbound
direction for
an untagged
frame
Tags the frame with the
PVID tag.
•
If the PVID is permitted on the port, tags the frame with the PVID
tag.
•
If not, drops the frame.
In the
inbound
direction for
a tagged
frame
•
Receives the frame if
its VLAN ID is the
same as the PVID.
•
Drops the frame if its
VLAN ID is different
from the PVID.
•
Receives the frame if its VLAN is permitted on the port.
•
Drops the frame if its VLAN is not permitted on the port.
In the
outbound
direction
Removes the VLAN tag
and sends the frame.
•
Removes the tag and sends
the frame if the frame carries
the PVID tag and the port
belongs to the PVID.
•
Sends the frame without
removing the tag if its VLAN
is carried on the port but is
different from the PVID.
Sends the frame if its VLAN is
permitted on the port. The
tagging status of the frame
depends on the
port hybrid vlan
command configuration.
Assigning an access port to a VLAN
You can assign an access port to a VLAN in VLAN view or interface view.
Make sure the VLAN has been created.
Assigning one or multiple access ports to a VLAN in VLAN view
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter VLAN view.
vlan
vlan-id
N/A
3.
Assign one or a group of
access ports to the VLAN.
port
interface-list
By default, all ports belong to
VLAN 1.
Assigning an access port to a VLAN in interface view
Step Command
Remarks
1.
Enter system view.
system-view
N/A
