H3C S5830V2 series, Справочник по командам, Страница: 146 / 301

134
Configuration file management
commands
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see
Security Configuration Guide .
archive configuration
Use archive configuration to manually archive the running configuration to the configuration
archive directory.
Syntax
archive configuration
Views
User view
Predefined user roles
network-admin
Usage guidelines
Before manually archiving the running configuration, you must use the archive configuration
location command to specify a directory and a name prefix for the configuration archives.
Configuration archive facilitates configuration rollback. It provides manual and automatic methods
for saving the running configuration. For more information about the archiving mechanism, see the
section about configuration rollback in
Fundamentals Configuration Guide .
Examples
# Archive the running configuration.
<Sysname> archive configuration
Save the running configuration to an archive file. Continue? [Y/N]: Y
The archive configuration file myarchive_1.cfg is saved.
Related commands
•
archive configuration interval
•
archive configuration location
•
archive configuration max
•
display archive configuration
archive configuration interval
Use archive configuration interval to enable automatic running-configuration archiving and set the
archiving interval.
Use undo archive configuration interval to restore the default.
Syntax
archive configuration interval minutes
undo archive configuration interval