H3C s5820x series Скачать руководство пользователя страница 221

Страница: 221 / 488

6-12

Parameters

med-value

: Default MED value, in the range 0 to 4294967295.

Description

Use the

default med

command to specify a default MED value.

Use the

undo default med

command to restore the default.

By default, the default

med-value

is 0.

Multi-exit discriminator (MED) is an external metric for routes. Different from local preference, MED is

exchanged between ASs and will stay in the AS once it enters the AS. The route with a lower MED is

preferred. When a router running BGP obtains several routes with an identical destination but different

next-hops from various external peers, it will select the best route depending on the MED value. In the

case that all other conditions are the same, the system first selects the route with the smallest MED as

the best external route.

Examples

# In BGP view, configure the default MED as 25.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] default med 25

# In BGP-VPN instance view, configure the default MED as 25 (the VPN has been created).

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpn-instance vpn1

[Sysname-bgp-vpn1] default med 25

default-route imported (BGP/BGP-VPN instance view)

Syntax

default-route imported

undo default-route imported

View

BGP view, BGP-VPN instance view

Default Level

2: System level

Parameters

None

Description

Use the

default-route imported

command to allow default route redistribution into the BGP routing

table.

Use the

undo default-route imported

command to disallow the redistribution.

By default, default route redistribution is not allowed.

Using the

default-route imported

command cannot redistribute default routes. To do so, use the

import-route

command.

Related commands:

import-route.

Содержание s5820x series









































































































































































































































































































































































































































































































Результаты поиска

Содержание s5820x series

Отзывы:

Похожие инструкции для s5820x series

Бренды по названию

Популярные бренды

H3C s5820x series, Справочник по командам

Результаты поиска

Содержание s5820x series

Отзывы:

Похожие инструкции для s5820x series

Бренды по названию

Популярные бренды