3-33
Power supply
Specifications
Reference
@ 50 Hz or 60 Hz
•
Max input voltage range: 90 VAC to 264 VAC @
47 Hz to 63 Hz
•
Max output power: 720 W
Module User Manual
PSR1110-56A
•
Rated input voltage range: 115 VAC to 240 VAC
@ 50 Hz or 60 Hz
•
Max input voltage range: 102.5 VAC to 264 VAC
@ 47 Hz to 63 Hz
•
Max output power: 1110 W
H3C PSR1110-56A Power
Module User Manual
NOTE:
The PSR1110-56A power supply adds 64 mm (2.52 in) to the total depth of the switch, which
includes the power supply handle.
Expansion modules
Table3-4 Expansion modules
Model
Description
Port
quantity
Available transceiver
modules and cables
Reference
LSWM2SP2PB
2-port 10-Gigabit
SPF+ fiber Ethernet
interface module
2
•
10-GE SFP+ module
•
10-GE SFP+ cable
•
GE SFP module
•
GE SFP cable
H3C LSWM2SP2PB
& LSWM2SP4PB
Interface Cards User
Manual
.
IMPORTANT:
By default, the operating mode is 0 for the expansion module on an S5130S-28C-HI or
S5130S-28C-PWR-HI switch. In this mode, ports 26 and 28 on the front panel are available, and
none of the ports on the expansion module is available. To use ports on the expansion module,
execute the
port-configuration-mode
command to set the operating mode to 1 and then
reboot the switch. After the configuration, ports 26 and 28 on the front panel become unavailable.
For more information, see the Layer 2—LAN switching configuration guide of the device.