84
LED mark
Status
Description
Steady yellow
A power module is installed in power module slot 1, but the power
module has failed or no power is input to the power module.
Off
No power module is installed in power module slot 1.
PWR2
Steady green
A power module is installed in power module slot 2, and the
power module is outputting power correctly.
Steady yellow
A power module is installed in power module slot 2, but the power
module has failed or no power is input to the power module.
Off
No power module is installed in power module slot 2.
RPS status LED
The S5560-30S-EI and S5560-54S-EI switches support RPS DC input. The RPS status LED shows the status
of the RPS DC input.
Table 31
RPS status LED description
LED mark
Status
Description
RPS
Steady green
Both the RPS DC input and the AC input are normal.
Steady yellow
The RPS DC input is normal, but the AC input is disconnected or has
failed.
Off
The RPS DC input is abnormal or no RPS is connected.
LED for the port LED mode (MODE)
To show more information about the switch through the port status LEDs, all S5560-EI switches except the
S5560-54QS-EI switch provides a MODE LED to indicate the type of information that the port LEDs are
showing.
You can use the LED mode switching button to change the indication of the MODE LED.
Table 32
Description for the MODE LED
LED mark
Status
Description
MODE
Steady green
The port status LEDs are showing port rates.
Flashing green (1 Hz) (available
only for S5560-30C-PWR-EI and
S5560-54C-PWR-EI switches)
The port status LEDs are showing the status of PoE
power supply on the ports.
Flashing yellow
The port status LEDs indicates the IRF member ID of
the switch. For example, if the LEDs for ports 1 to 5
are steady green and the other LEDs are off, the IRF
member ID of the switch is 5.
