H3C S5500-SI Series, Руководство по эксплуатации

Страница: 59 / 1217

1-11
Currently, when you configure load-balancing link aggregation groups in Layer 2 aggregate interface
view, the switch supports configuring hash keys in the following modes:
z
Use a source IP address, a source MAC address, or a destination MAC address alone as a hash
key.
z
Combine a destination MAC address and a source MAC address, a source IP address and a
destination IP address to form a hash key.
Displaying and Maintaining Link Aggregation
To do... Use the command... Remarks
Display the local system ID display lacp system-id Available in any view
Display the aggregation
group-specific load sharing
mode
display link-aggregation
load-sharing mode
Available in any view
Display link aggregation details
of ports
display link-aggregation
member-port
[ interface-type
interface-number [ to interface-type
interface-number ] ]
Available in any view
Display the summary
information of all aggregation
groups
display link-aggregation
summary
Available in any view
Display detailed information of
aggregation groups
display link-aggregation verbose
[ bridge-aggregation
[ interface-number ] ]
Available in any view
Clear the LACP statistics of
ports
reset lacp statistics [ interface
interface-type interface-number [ to
interface-type interface-number ] ]
Available in user view
Link Aggregation Configuration Examples
In an aggregation group, the port to be a selected port must be the same as the reference port in port
attributes, and class-two configurations. To keep these configurations consistent, you should configure
the port manually.