3-6
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enable CFD
cfd enable
Required
CFD is disabled by default.
Create an MD
cfd md
md-name level level-value
Required
Not created by default
Create an MA
cfd ma ma-name md md-name vlan
vlan-id
Required
Not created by default
Create a service instance
cfd service-instance instance-id md
md-name ma ma-name
Required
Not created by default
z
These configuration tasks are the foundation for other CFD configuration tasks.
z
The last three steps in the table above must be performed strictly in order.
Configuring MEP
MEPs are functional entities in a service instance. CFD is implemented through operations on MEPs,
which provides such functions as CC, LB, LT and gives prompts on error CCMs and cross connections.
As a MEP is configured on a service instance, the MD level and VLAN attribute of the service instance
become the attribute of the MEP.
Follow these steps to configure a MEP:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter Ethernet port view
interface interface-type
interface-number
—
Configure a MEP
cfd mep mep-id service-instance
instance-id
{
inbound
|
outbound
}
Required
Not configured by default
Configure a remote MEP for a
MEP in the same service instance
cfd remote-mep remote-mep-id
service-instance instance-id mep
mep-id
Required
No remote MEP is configured for a
MEP by default.
Enable the MEP
cfd mep service-instance
instance-id mep mep-id enable
Required
Disabled by default
