43
Figure 15
Configuration page
Configuring common settings for VTY user interfaces (optional)
Follow these steps to configure Common settings for VTY user interfaces:
To do…
Use the command… Remarks
Enter system view
system-view
—
Enable display of copyright
information
copyright-info
enable
Optional
Enabled by default.
Enter one or multiple VTY user
interface views
user-interface vty
first
-
number
[
last-number
]
—
Enable the terminal
service
shell
Optional
Enabled by default.
Enable the current
user interface(s) to
support either Telnet,
SSH, or both of them
protocol inbound
{
all
|
ssh
|
telnet
}
Optional
By default, both protocols are supported.
The configuration takes effect next time you
log in.
Define a shortcut key
for terminating tasks
escape-key
{
default
|
character }
Optional
By default, you can press
Ctrl+C
to
terminate a task.
Configure the type of
terminal display
terminal type
{
ansi |
vt100
}
Optional
By default, the terminal display type is
ANSI.
User
interface
configuration
Set the maximum
number of lines on the
next screen
screen-length
screen-length
Optional
By default, the next screen displays 24
lines.
A value of 0 disables the function.
