Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Information Center Configuration
1-12
1.2.6 Setting to Output System Information to the Log Buffer
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default.
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
for
default channel names.
Configure the channel
through which system
information can be output
to the log buffer and
specify the buffer size
info-center logbuffer
[
channel
{
channel
-
number |
channel
-
name
} |
size
buffersize
] *
Optional
System information is
output to the log buffer by
default with channel 4
(known as logbuffer) as
the default channel and a
default buffer size of 512.
Configure the output rules
of the system information
info-center source
{
module
-
name
|
default
}
channel
{
channel
-
number |
channel
-
name
} [
debug
{
level
severity
|
state
state
} * |
log
{
level
severity
|
state
state
} * |
trap
{
level
severity
|
state
state
} * ] *
Optional
output rules of the system
information.
Configure the format of
the timestamp
info-center timestamp
{
debugging
|
log
|
trap
}
{
boot
|
date
|
none
}
Optional
The time stamp for log,
trap and debug
information is
date
by
default.
1.2.7 Setting to Output System Information to the SNMP NMS
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable information center
info-center enable
Optional
Enabled by default
Name the channel with a
specified channel number
info-center channel
channel-number name
channel-name
Optional
Refer to
for
default channel names.