9
3.2.1 Installing the RPS Unit to a 19-inch
Rack
Caution:
The front mounting ears are used only for fixing
the RPS unit to the rack; they cannot bear the
weight of the RPS unit. When installing the
RPS500-A3 to a 19-inch rack, be sure to use a
tray or bracket to support the weight of the unit.
Step 1: Put on an ESD-preventive wrist strap and
check the grounding and stableness of the rack.
Step 2: Fix the supporting tray supplied with the
rack horizontally at the appropriate position of the
rack.
Step 3: Attach the front ears to the front end of the
RPS unit using screws, as shown in Figure 3 .
Figure 3
Install the RPS unit to a 19-inch rack (1)
