3-5
Figure3-5 Removing a transceiver module and optical fiber (LC ports)
Figure3-6 Removing a transceiver module and optical fiber (MPO port)
Replacing a QSFP28/SFP28 copper cable
1.
Wear an ESD wrist strap. Make sure the wrist strap makes good skin contact and is reliably
grounded.
2.
Hold the pull tab of the connector to remove the copper cable from the QSFP28/SFP28
transceiver module.
3.
Connect a new QSFP28/SFP28 copper cable. For the installation procedure, see "
