11
To mount the router on a workbench:
1.
Place the router upside down on the workbench and attach the rubber feet to the four round
holes in the chassis bottom.
Figure 10 Attaching rubber feet to the router
2.
Place the router upside up on the workbench. Make sure the rubber feet stand securely on the
workbench.
Figure 11 Mounting the router on a workbench
Installing the router on a wall
CAUTION:
Make sure the port side of the router is on the top and is parallel to the floor.
To install the router on a wall:
1.
Determine and mark the locations of the mounting holes on the wall, and drill four 22 mm (0.87
in) diameter holes at the mounting hole locations you marked.
